Gator Supersand Bond

SUPERSAND BOND is a unique mixture of polymer binders and calibrated sand available in Beige and Slate Grey. The installation of SUPERSAND BOND is almost identical to using regular paver joint sand except for the application of water. Once SUPERSAND BOND polymeric sand sets, it becomes very firm and locks between the paver joints while still retaining flexibility and providing a long lasting, durable jointing material. SUPERSAND BOND is recommended for a variety of uses including pool decks, patios, footpaths, driveways, parking spaces, pavements etc.

  • Residential use
  • Traditional application
  • Concrete pavers, wet cast products
  • Sloping areas, pool surroundings, patios, walkways, driveways and more
  • Advanced Haze Free Technology
  • For Traditional application, rain safe 1 hour after water activation
  • Can be used for joints up to a maximum of 1″ (2.5 cm)
  • ASTM C-144 gradation of the polymeric sand allows use in even the tightest joints
  • OSHA silica crystalline compliant (OSHA 29 CFR 1926.1153)
  • Works above 32°F (0°C)
  • Waterproof bags: Lay the bag flat on its back, so the front of the bag is facing you. Intact pallets can be stored outdoors
  • 15-Year Limited Warranty
  • Helps prevent weeds and damage caused by burrowing insects
  • Helps prevent erosion due to wind, rain, and freeze thaw cycles

Polymeric Sand 2 Color sample bar 300x140 1

Interested? Call, Contact, or Visit Us today.


When maintaining the paver surface, apply Gator Shampoo to clean the entire paved surface including the paver joints. Wash, rinse and remove any residue by using a hose and a watering gun set to shower with the normal maximum water pressure from any residential or commercial building (typically 80 psi/550 kPa).


SUPERSAND BOND will not cause nor prevent moss, mold or mildew. Moss, mold and mildew are caused by certain on site conditions including excess moisture, shade, absence of ventilation, inadequate cleaning or maintenance, presence of soil or other organic debris left on the product.

Clay Pavers

If used on clay pavers make sure they are 100% dry. Clay pavers tend to hold moisture, which can prematurely activate the SUPERSAND BOND while the sand is being spread over the paver surface, leaving a residue (always apply on a test area before using the SUPERSAND BOND on clay pavers).

Per 50 lb (22.7 kg) bag (Paver 2-3/8” (6 cm) in height) NARROW JOINTS 1/8” to 3/8” (3-9 mm) WIDE JOINTS 3/4” to 1” (19-25 mm)
Beige, Slate Grey 65-85 sq. ft. (6-7.9 sq.m.) 22-42 sq. ft. (2-3.88 sq. m.)


Product Size Units per Pallet
SUPERSAND BOND – Beige 50 lb (22.7 kg) 56 USA / 70 CAN
SUPERSAND BOND – Slate Grey 50 lb (22.7 kg) 56 USA / 70 CAN

Supersand pallet packaging 56 bags USA

You may also like…