Welcome to Tips n’ Tricks Tuesday, your dedicated source for valuable insights, clever hacks, and expert advice that will empower you to tackle masonry challenges with finesse and efficiency.

Numerous homeowners opt for the use of natural stone in their home improvement endeavors, drawn to its cost-effective attributes. Natural stone lends an organic ambiance to outdoor living spaces, as it is directly sourced from the Earth and remains unaltered. Additionally, homeowners appreciate the distinctiveness of natural stone, as each formation possesses a unique appearance, reflecting the individuality of each stone. This material enjoys popularity in both indoor and outdoor applications, including natural stone countertops, rock walls, walkways, and more.

Regrettably, many homeowners encounter the issue of natural stone gradually fading and showing signs of wear over time. Consequently, refinishing natural stone presents a viable solution for those seeking to reverse the natural degradation of their stone-based projects.

The subsequent article from us outlines the steps for individuals looking to undertake the refinishing of natural stone in their living spaces, ultimately restoring the vibrant aesthetics reminiscent of wet stone surfaces.

How to Refinish Natural Stone

Over time, natural stone can lose its luster and succumb to stains and wear. Unlike artificial plaster or molded stone, natural stone conceals layers of vibrant color beneath its weathered surface. Just as river stones appear more appealing when wet, the application of polish and sealers can rejuvenate the radiance of natural stones. Whether you’re restoring your marble countertops, refurbishing a natural stone tiled floor, or revitalizing a charming garden pathway, your stones can once again emanate the same vibrant gleam they possessed when initially installed.

Materials You’ll Need:

  1. Stiff scrub brush
  2. Bucket of soapy water
  3. Electric sander and stone buffer
  4. Stain
  5. Sealant
  6. Natural bristle paintbrush
  7. Paint thinner
  8. Wire brush


  1. Begin by scrubbing the stone to remove all dirt, debris, and any paint from its surface. For outdoor pathways, a pressure washer may prove more efficient. In some cases, you might require a wire brush to eliminate stubborn paint residues.
  2. Allow the stone to dry thoroughly before using an electric sander to gently buff out stains. Utilize fine-grade sandpaper to enhance the stone’s polish.
  3. Rinse the stone with clean water and ensure it dries completely. It’s crucial to eliminate all dirt and debris, as any remaining contaminants will persist once the stain and sealant are applied.
  4. Apply the stain using a bristle brush. Follow the instructions on the product you’re using to determine the appropriate temperature and drying time required before applying the sealant.
  5. Employ a clean bristle brush to apply the sealant. Allow the sealant to dry, and refrain from walking on or using the treated area for a minimum of 24 hours.

Tips & Warnings:

  • When refurbishing an outdoor natural stone walkway, plan your project during warm, dry weather to prevent rain or cold temperatures from interfering with the staining and sealing processes.
  • If you’re working with indoor stone tiles or countertops, opt for nontoxic staining and sealing products. Alternatively, complete the task with all windows, doors, and ventilation systems open to enhance airflow and reduce toxicity.

Armed with the knowledge of the correct steps for refinishing natural stone in your home, you’re well-equipped to restore that captivating, original appearance your natural stone once boasted.

Contemplating the commencement of your very own natural stone project but feeling uncertain about where to begin? Reach out to Camosse Masonry Supply. We offer a comprehensive selection of premium natural stone products and are here to offer expert masonry guidance to ensure your project’s success.