Silpro focuses on repair mortars and resurfacing materials. All of their products are available in many different sizes so you always have what your need. Some come in bags, others in buckets. If you would like us to order a size that isn’t in stock, we can special order that.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
C-21 All Acrylic
C-21 ALL ACRYLIC is a water based cement modifier / bonding agent. It enhances the performance properties of mortars and coatings. When you add it to the mix it forms a plastic matrix, or film, that helps retain water and promotes cement hydration. Ideal for application on floors, ramps, sidewalks, and masonry walls.
- 100% acrylic latex
- Use as an admix
- Improve compression strength
- Use as internal bonding agent
- No wet curing
- Use it as a primer
California Stucco
Portland cement based water resistant coating, CALIFORNIA STUCCO, is easy to apply and has the ability to withstand severe climate conditions. It combines a variety of textures with low maintenance cost in a permanent finish material. Available in white or gray. White CALIFORNIA STUCCO can be colored with SILPRO HAWK & TROWEL PIGMENT.
Requires C-21
Concrete Supplement
Mix designs with complete hydration have increased compressive strength, a reduction in shrinkage and faster set times. CONCRETE SUPPLEMENT is an integral admixture that reacts with Portland cement in concrete, mortar, stucco, and grout to produce complete hydration.
Masco
MASCO is a polymer modified Portland cement based mortar. Can be used for patching, resurfacing, and leveling floors. Serves as a wearing surface or as an underlayment for carpet, tile, wood, sheet goods, and athletic surfaces. The specially formulated MASCO powder is mixed on the job with SILPRO C-21 ALL ACRYLIC admix.
- Requires C-21
- Highly abrasion resistant
- Impact resistant
- Can withstand extreme temperature fluctuation
- Use indoors or outdoors
- Above or below grade application
- Use on horizontal and vertical surfaces
- Can be completely submerged
Mascrete
MASCRETE is a polymer modified, Portland cement based mortar used for patching, resurfacing, and leveling floors. When mixed right from the bag it can be applied in thicknesses ranging from 1/8″ to 3/4″. For large thicknesses (3/4″ – 3″) mix with 40#-80# of clean 3/8″ crushed stone so it retains strength. MASCRETE powder needs to be mixed with SILPRO C-21 ALL ACRYLIC admix.
- Requires C-21
- Highly abrasion resistant
- Impact resistant
- Can withstand extreme temperature fluctuation
- Use indoors or outdoors
- Above or below grade application
- Use on horizontal and vertical surfaces
- Can be completely submerged
Sealcote
SEAL COTE is a Portland cement based coating used to waterproof, protect, and decorate new and old concrete and masonry. Brush it on a vertical concrete and masonry interior or exterior surface. Use above or below grade. Available in gray or white.
Requires C-21
Silflo 220
SILFLO 220 SELF-LEVLER is a high performance, general purpose, Calcium Aluminate cement based polymer modified underlayment. Recommended for resurfacing and leveling interior concrete, wood, cement tarrazzo, quarry and ceramic tile floors. Use prior to the installation of resilient flooring, ceramic tile, wood flooring, laminate, or carpet.
Silflo 230
SILFLO 230 SELF-LEVELER is a high performance, multi purpose, cement based polymer modified topping that can be used as a self leveling underlayment. Use it as an exposed wearing surface for interior applications. Polish SILPRO 230 to achieve the desired appearance. As an underlayment it is recommended for resurfacing and leveling interior concrete, wood, cement terrazzo, quarry, and ceramic tile floors. Apply it prior to installation of resilient flooring, ceramic tile, wood flooring, laminate, or carpet.
Silprogrout 424
SILPROGROUT 424 is a high performance, high-stength, nonshrinking, non-metallic, cement based grout for use in plant maintenance and general construction.
Skim Pro
SKIMPRO Skim coat is a fast setting high performance, polymer modified one component product for leveling and smoothing concrete. Prior to installation of finished flooring use it to level and smooth ceramic and quarry tile, terrazzo, and wood. This Portland cement based product easily mixes with water. SKIMPRO is extremely easy to apply and does not require priming. Allows you to install floor coverings in 30 minutes.
TDQ
TDQ THIN DEEP QUICK REPAIR is a one component, high quality, cement based multipurpose repair material. For use on interior and exterior projects. Sets fast and is a high strength compound.
Weld-o-bond
WELD-O-BOND bonding agent is specifically formulated for bonding Portland cement. Mixes to interior or exterior concrete or masonry surfaces and gypsum mixes to interior concrete, masonry, or plaster surfaces.
