Mortar Sand

PROMASONRY Mortar Sand meets or exceeds ASTM C-144 specification for masonry mortar aggregate.

SUGGESTED USES:
Can be mixed with Portland cement to achieve a high performance mortar, paver base, paver joints, general landscaping, traction in snow and icy conditions.

PROMASONRY Mortar Sand can be mixed with Portland cement to achieve a high performance mortar. Below are two charts for proportioning mixes according to ASTM C-270 standards.

• The first chart specifies a Portland cement and hydrated lime based mix.
• The second chart specifies a Portland cement or masonry cement based mix.
• The left panel lists each mortar type and defines how they are most commonly used.

Mortar Types and Strengths:

Type M - Very high strength mortar (2500+ psi or 17.2+ MPa) commonly used in exterior applications at or below grade.

Type S - High strength mortar (1800+ psi or 12.4+ MPa) commonly used in exterior load bearing applications above or below grade

Type N - Moderate strength mortar (750+ psi or 5.2+ MPa) commonly used in interior or exterior non load bearing applications at or above grade

Type O - Low Strength mortar (350+ psi or 2.4+ MPa) commonly used in tuck pointing and interior non-load bearing applications

Type K - Very low Strength mortar typically used when tuck pointing historic structures