Product is supplied ready to use. No stirring or thinning is required. Before using this product, thoroughly read product’s label and Safety Data Sheet (SDS). Test in an inconspicuous area before starting the general application to ensure desired results. Recommended application temperatures are 50°F – 80°F (10°C – 27°C).
Work in small areas (no larger than 10 sq. ft./.93 sq.m.). Apply to dry pavers. Product may be applied to both vertical or horizontal surfaces by brush at a rate of approximately 200 sq. ft./gallon (18.58 sq. m./3.78 liters).
Allow 10 minutes for the stripper to soak into and soften the coating for removal.
Lightly scrub the surface with a natural bristle broom to remove stubborn areas. Use high-pressure wash to remove the stripper and coating. Difficult areas may need a second treatment. Sealer will re-adhere if not completely removed.